Full Product List

A high build, solvent free epoxy repair paste designed for restoring and protecting metallic surfaces. Easily machinable once cured, with excellent adhesion and strong structural integrity.

A high build, epoxy repair paste designed for extreme heat applications. Resists high operating temperatures, retains strength at elevated conditions, and ensures durable metal restoration.    

A fast curing, solvent free epoxy putty stick for emergency metal repairs. Easy to hand mix and apply, it develops high mechanical strength rapidly, making it ideal for sealing leaks and restoring damaged components.

Designed for industrial metal repairs, this epoxy fluid bonds to minimally prepared surfaces, withstands oil contamination, and cures quickly for efficient application.

A two component epoxy putty stick designed for underwater repairs. Bonds and cures underwater, providing a fast and reliable solution for emergency leak sealing.

A fast curing, solvent free epoxy ideal for rapid metal repairs. Bonds underwater, requires minimal preparation, and is fully machinable for consistent, reliable results.

A high build epoxy repair paste with an extended usable life, allowing for precise and controlled repairs in warmer climates. Once cured, it can be shaped, drilled, or sanded for metal restoration.

A water activated repair bandage for sealing leaking pipes. Simple to use, cures rapidly, and allows a fast return to service, even on live water leaks.

A silicone tape designed for live leak sealing on low pressure pipes. Instantly cures upon application, creating a secure, watertight seal without additional adhesives.

A reusable rubber tourniquet designed for emergency leak sealing on live water pipes. Instantly seals leaks up to 5 Bar (72.5 psi) without adhesives for rapid containment.

A durable epoxy filler designed to repair worn and corroded metal surfaces. Provides excellent abrasion and erosion resistance for long lasting protection.  

An epoxy fluid reinforced with hardened ceramic fillers, designed to protect metallic surfaces in abrasive fluid flow environments, offering excellent abrasion and erosion resistance.

An erosion and corrosion resistant epoxy coating designed for fluid flow applications, improving flow efficiency by reducing wear and damage in harsh process environments.

A high build epoxy paste enhanced with ceramic beads, designed to protect metallic surfaces from extreme sliding abrasion and medium to large aggregate flow.

A solvent free epoxy with ceramic beads for fine sliding abrasion. Suitable for pipe bends, chutes, hoppers, and more in extreme wear environments.

A two-component solvent-free epoxy with ceramic beads for extreme impact and sliding abrasion. It provides high adhesion for protecting metal substrates from aggregates and wet slurries.

Designed for extreme wear environments, this solvent free epoxy withstands high operating temperatures, abrasion, particle flow, offering long lasting protection in wet slurry and sliding wear applications.

Engineered to protect metal surfaces from erosion and corrosion in high temperature environments, it is suitable for both hydrocarbon and aqueous applications, resisting fluid flow up to 130°C (265°F).

A durable epoxy novolac coating for high temperature immersion in acidic environments. Provides long term protection against corrosion and aggressive chemicals up to 110°C (230°F).

An epoxy novolac coating designed to protect equipment from erosion and corrosion in high temperature immersion environments, resisting fluid flow up to 180°C (356°F).

A highly flexible epoxy coating formulated for wet and underwater application. Designed to protect steel and concrete structures from corrosion, abrasion, and chemical attack in marine and splash zone environments.

A durable, flexible polyurethane coating designed for surfaces exposed to extreme impact, wear, and abrasion. Provides long lasting protection for concrete and metallic structures.

A solvent free epoxy resin designed for injection applications, pipe wrapping, and gap filling. Provides corrosion protection and high strength bonding for dissimilar materials.

A surface-tolerant, solvent-free epoxy repair paste. This high-build paste can be applied up to 20 mm thick on manually or mechanically cleaned metallic surfaces.

A carbon fibre reinforced repair system with a solvent free epoxy resin for pipe wrapping and corrosion protection. Delivers high pressure resistance for long term structural integrity.

A fast curing, solvent free urethane elastomer designed for flexible repairs on a wide range of rubber surfaces including Nitrile, Neoprene, and natural rubber.

A flexible, abrasion resistant urethane elastomer repair paste. Designed for lining and repairing rubber surfaces, it bonds effectively to Nitrile, Neoprene, and Natural rubber.

A pourable, solvent free urethane elastomer designed for abrasion resistant rubber repairs and linings. Suitable for mould creation, gasket sealing, and process equipment.

Abrasion resistant coating. A high build solvent-free abrasion resistant epoxy coating designed to protect metallic and concrete structures and equipment from chemical attack, wear & abrasion.

A high build, epoxy coating designed for long term protection of steel and concrete structures, offering corrosion resistance and chemical protection.

A high build epoxy coating with extended usable life, designed for corrosion and chemical protection of steel and concrete structures, particularly in warmer climates.

A solvent free epoxy primer designed for sealing and strengthening concrete surfaces. Its penetrating formula ensures strong adhesion with Resimac topcoats and allows for easy application.  

A low-viscosity, solvent-free epoxy primer with an extended usable life. It penetrates deeply into concrete surfaces, ensuring high adhesion with Resimac overcoating systems. Ideal for spray applications and warmer climates.

A low viscosity, solvent free epoxy primer designed for sealing green or wet concrete. It penetrates deeply to ensure strong adhesion with Resimac top coats and cures at temperatures as low as 10˚C (50˚F).

A solvent based epoxy primer designed for long term corrosion protection on steel and concrete structures, even in cold, damp conditions.

A high build, flexible polyurethane coating designed for corrosion and chemical protection on steel and concrete. WRAS approved for use in drinking water (potable) storage and immersion applications.

A solvent-based polyurethane coating for long-term protection against corrosion and UV degradation. Ideal for steel and concrete surfaces primed with 506 Aluprime or 501 CRSG, offering resistance to UV, corrosion, and weathering.

A single-component, moisture-cured urethane primer with excellent adhesion to metallic surfaces. It offers a 24-hour overcoating window and is compatible with Resimac polyurethane and UV stable top coats.

A single-component, moisture-cured urethane primer with a 7-day overcoating window. Ideal for priming previously coated and metallic surfaces, it is compatible with Resimac polyurethane and UV stable top coats.

Solvent free epoxy novolac coating designed for chemical and corrosion protection of steel and concrete. Resists strong acids and alkalis, making it ideal for bunds, tanks, and containment areas.

A high-build, solvent-free epoxy novolac coating for chemical and corrosion protection at elevated temperatures. Applied by roller or airless spray, it resists high-concentration chemicals.

A solvent-free epoxy novolac coating for chemical and corrosion protection at elevated temperatures. It can be applied by roller or airless spray and resists chemicals at immersion temperatures up to 75°C.

A high-build, solvent-free epoxy novolac coating for abrasion and chemical protection at elevated temperatures. With hardened ceramic particles, it is ideal for abrasive environments and resists industrial chemicals and acids.

A high gloss, UV-stable, water based polyurethane wall coating. Provides hygienic protection, resisting MRSA, E. Coli, and other bacteria, while offering graffiti, chemical, and abrasion resistance for internal and external surfaces.

A high-performance, multi-purpose, water-based epoxy primer for non-porous surfaces. Suitable for a wide range of construction surfaces, it provides excellent adhesion and versatility.

A single-component, water-based acrylic sealer for porous surfaces. Ideal for dustproofing and sealing concrete, it penetrates deeply and leaves a slight sheen on cured surfaces.

A single-component, water-based acrylic coating for anti-carbonation protection. It provides a flexible, UV stable, weatherproof finish on concrete, plaster, brick, and asbestos cement surfaces.

A water based epoxy coating designed for direct to metal application. Offers fast curing, corrosion protection, and is ideal for minimal surface preparation, providing reliable protection in a single coat.

A single-component, solvent-free heat-activated epoxy novolac coating for corrosion protection. Designed for metallic surfaces operating at 100˚C to 240˚C, it offers excellent corrosion resistance at high temperatures.

A single-component, water-based acrylic waterproof coating for tank bases. It forms a seamless, flexible membrane to protect against moisture ingress and corrosion, offering long-term UV stability.

A water-based acrylic emergency roof coating. This UV-stable membrane is surface-tolerant, cures at temperatures as low as 5°C, and is showerproof within 15 minutes. Ideal for damp surfaces on roofs and GRP structures.

A single pack, water based acrylic coating for long term corrosion protection. UV-stable, flexible, and suitable for application on previously coated surfaces.

An insulative epoxy coating that reduces surface temperatures and prevents condensation build-up. Designed to reduce heat transfer and prevent corrosion under insulation (CUI).

A high-build, solvent-free epoxy coating that reduces surface temperatures from 140°C (284°F) to below 55°C (130°F). Designed for operational surfaces to reduce heat transfer and burn risk.

A self-priming, three-part, solvent-free epoxy repair mortar. Fast-curing and suitable for foot and forklift traffic, it offers good chemical and abrasion resistance, making it ideal for quick repairs.

A lightweight, three-part, solvent-free epoxy repair mortar. Designed for overhead and vertical cementitious surfaces, it can be applied up to 50 mm (2 inches) thick without sagging, making it ideal for columns and sills.

A single-component, polymer-modified cement-based screed that resists 10 bar negative hydrostatic pressure. Ideal for preventing moisture ingress and compatible with Resimac primers and top coats.

A fast-curing, single-component polymer-modified cement screed. It resists 10 bar negative hydrostatic pressure, making it ideal for moisture ingress prevention. Compatible with Resimac primers and top coats.

A fast-curing, single-component polymer-modified cement putty. It resists 10 bar negative hydrostatic pressure and stops live leaks under pressure in concrete substrates, ideal for sealing cracks, joints, and voids.

A flexible, solvent-free polyurethane sealant for expansion joints. This fast-curing, pourable sealant accommodates movement and resists jet fuels, oils, and chemicals, ideal for concrete paved areas and industrial applications.

A high-strength, solvent-free epoxy repair mortar. Designed for uneven concrete surfaces, it is ideal for forklift and heavy traffic areas, with a build thickness of 10-30mm to reduce surface imperfections.

A high-strength, chemical-resistant, solvent-free epoxy repair mortar. Ideal for heavy traffic and chemical process areas, it can be applied at 10-30mm thickness and resists strong industrial acids.

A solvent free epoxy floor coating designed for durability and wear resistance. Provides a hard wearing, gloss finish and is available in a range of colours for various industrial and commercial applications.

A solvent-free, high-build epoxy anti-static floor coating. Applied by brush or roller, it offers chemical and abrasion resistance, ideal for areas requiring static control with a resistance of less than 10⁸ ohms.